LUMBER HEAT TREATING
Click to Review: HT Stamp – Lumber Markings
PLANT PROTECTION AND QUARANTINE
Wood Packaging Materials
Lumber Heat Treatment (HT) Program
The American Lumber Standard Committee (ALSC) in coordination with APHIS and the wood packaging industry has developed an official program in order for the ALSC to implement a quality control program for the official labeling of heat treated WPM with the ISPM 15 official mark to signify compliance with the ISPM 15 standard. The ALSC administers the heat treatment program. The program requires WPM producers to enroll with an inspection agency accredited by the ALSC.
In order for WPM under the HT program to be ISPM 15 compliant, WPM may be produced by one of two methods:
The WPM producer may purchase previously ALSC accredited agency HT grade marked lumber, and cut components from the HT labeled lumber for use in construction of the WPM. The resultant WPM product is then eligible to be labeled with an ALSC Accredited Agency Quality Mark to show the WPM is compliant with ISPM15.
The WPM producer may construct WPM from lumber that is not heat treated, place the product in a heat chamber and heat treat the WPM product to achieve the minimum wood core temperature of 56 degrees C for a minimum of 30 minutes . The product then must be labeled with one of the ALSC accredited Agency Quality Marks to show the heat treated WPM is compliant with ISPM 15.
Important note to exporters: In the U.S. the inspection agencies control the issuance of the ALSC Accredited Agency Quality Mark. It is the presence of the ALSC Accredited Agency Quality Mark that will ensure WPM produced in the U.S. and destined for export channels meets the importing countries regulations based on ISPM15. Exporters may purchase WPM on the secondary market from WPM producers certified to apply the ALSC Accredited Agency Quality Mark.
In order to ensure your WPM is compliant a listing of inspection agency contacts may be obtained by visiting the American Lumber Standard Committee web site at www.alsc.org or contact the ALSC at 301-972-1700.
For more information please click on the following lings:
Changing Regulations on Packing Material: Will You Be Affected?
By Michael Hicks
At any given time of the day or night, there are several billion dollars’ worth of goods in route by truck, rail, air and sea to customers here and abroad. A significant proportion of these goods is shipped in wooden containers or on some type of wooden platform (e.g., pallets). Pallets are used to load, store and protect goods ranging from fruits and vegetables and frozen chicken to mainframe computers and stereo components as they are moved from the factory to the warehouse to the neighborhood store or to the buyer overseas. Right now, there are an estimated 2 billion pallets in use in the United States. It is estimated that well over one-half of the $1.7 trillion worth of the goods that entered or left the United States in 1999 used some form of solid wood packing material. According to the National Wooden Pallet and Container Association, there were an estimated 454 million pallets produced in the United States in 1999, consuming upward of 7 billion board feet of lumber, representing well over 10 percent of total U.S. lumber production. Last year, another 225 million pallets were recycled–or, more specifically, they were repaired and put back into service. It is estimated that 95 percent of the pallets produced in 1999 were made from lumber, another 2 percent from plywood and oriented strand board, and the remainder from plastic, steel or other materials. Lumber has historically been the material of choice for any number of reasons, not least of which is ease of manufacture and cost. Wooden pallets have a range of durability; they can be designed to last for one trip or for years of reliable service. Recently, concerns have been expressed that wooden containers and pallets can carry more than their intended loads. They can potentially serve as pathways for the introduction of quarantine pests.
Finland Fights Foreign Insect Species
Finland began requiring phytosanitary certificates for coniferous solid wood packing material from the United States, Japan, Canada, China, Korea, Mexico and Taiwan, on May 31, 2000, certifying that the solid wood packing material was free of bark and grub holes (insect holes) and had a moisture content of less than 20 percent, or had been heat-treated, kiln-dried or fumigated. APHIS has determined that issuing phytosanitary certificates for SWPM is impractical and consequently recommends that exporters use alternatives to coniferous packing material for shipments to Finland. Nor are pallets the only materials that are subject to concern. Other solid wood packing material (SWPM)–wood dunnage, crating, cable spools, packing blocks, drums, cases and skids–are also perceived to be pathways. (It’s important to note, though, that not all materials are able to harbor pests. For example, wooden containers and pallets manufactured from highly processed wood products such as plywood, oriented strand board and corrugated paperboard are not considered solid wood packing material from a regulatory point of view.)
Keeping Pests Out of the Packing
The introduction of exotic pests is of significant concern not only to plant health officials but to those who could be impacted by these pests. We only have to look back at history to see the impact of introducing exotic pests or diseases into an environment where there are no natural enemies. For example, the introduction of chestnut blight into the United States, presumably from eastern Asia, all but wiped out the American chestnut tree in the early 1900s. Dutch elm disease, introduced in the 1920s, has raised questions about the continued existence of the American elm. More recently, an outbreak of the Asian long horned beetle led to the destruction of scores of hardwood trees in neighborhoods in New York and Chicago.
Risk Consciousness Spreads Worldwide
Australia and New Zealand were two of the first countries to recognize the risks associated with SWPM. Several other countries have also implemented (or announced they will implement) requirements for SWPM. In November 1998, Canada, Mexico and the United States, under the auspices of the North American Plant Protection Organization (NAPPO), agreed on the elements of a common standard to address the risks associated with SWPM. All three countries have initiated regulatory action that will ultimately result in national standards that comply with the NAPPO standard. USDA’s Animal and Plant Health Inspection Service (APHIS) has just completed a draft Pest Risk Assessment that analyzes the risks associated with solid wood packing material. This will be followed by a Pest Risk Reduction Analysis of the environmental and economic impacts of various alternatives to minimize the risks associated with SWPM. A proposed rule is still many months off and it could be at least the second half of 2002 before any new regulation is in place in the United States.
Keeping Pests Out of Packing Material
In the interim, the United States is relying on self-declaration by importers–with the exception of SWPM from China and Hong Kong. This declaration states that the SWPM is free of bark and apparently free of insects. APHIS recorded upward of 200 interceptions of pests in SWPM at the U.S. border in 1999.
Allied Against the Asian Long horned Beetle
On Sept. 18, 1998, following repeated interceptions of Asian long horned beetle (ALB) and the discovery of the ALB in 26 locations throughout the United States (mainly in and around import warehouses containing SWPM from China), APHIS cracked down. The agency published an interim rule in the Federal Register requiring that all cargo containing SWPM leaving Chinese ports on or after Dec. 17, 1998, be certified by the Chinese Government as heat-treated, fumigated or treated with preservatives prior to arrival in the United States. (Highly processed wood materials such as plywood and oriented strand board were not subject to the requirements.) Inspectors are on the alert. In fact, if a cargo contains no SWPM, it must carry an exporter’s statement certifying that the shipment contains none. It is estimated that between one-quarter and one-half of China’s exports to the United States (valued at $42 billion in 1999) were affected by the change.
Pest Concern Heightens Worldwide
The United States is not the only nation that’s working to fend off the risk of introducing pests in packing material. Brazil has also implemented regulations requiring SWPM from China, Hong Kong, Japan, North and South Korea, Taiwan and the United States be fumigated and accompanied by a phytosanitary certificate. On April 14, 2000, Brazil removed the United States from its list of countries whose solid wood packing material must be fumigated and accompanied by a phytosanitary certificate. This took place after the United States put in place an eradication program to prevent the spread of the ALB outside of the New York and Chicago metropolitan areas. The problem of imported insect pests cuts across national borders, affecting the United States as both an importing and an exporting nation. Here, tree removal in Chicago testifies to the destructiveness of the Asian long horned beetle (ALB).
Careful Measures Down Under
Shipments entering Australia and New Zealand and requiring immediate clearance on arrival must be accompanied by a valid industry treatment certificate documenting that the SWPM has undergone fumigation, heat treatment or some other approved form of treatment within 21 days of shipment. Otherwise, shipments are subject to quarantine inspection and treatment if necessary, and possible delays.
Fencing Out the Pinewood Nematode
On Jan. 1, 2000, China began requiring that coniferous SWPM shipments from the United States and Japan must be treated to prevent the spread of the pinewood nematode (PWN). China is not the only country in recent years to put in place regulations to address the risks associated with the PWN. Beginning Jan. 1, 2001, the European Union (EU) intends to require SWPM made with wood from coniferous species from Canada, China, Japan and the United States to be either heat- or pressure-treated. The regulations would also require that the SWPM display an officially approved mark identifying the treatment facility. A significant portion of the $150 billion in U.S. exports to the EU could be affected by the proposed rule in that more than 30 percent of all pallets (and probably a higher percentage of pallets used for export) are made from softwoods, as is a significant proportion of boxes and other containers. The United States has requested that the EU delay the implementation of the new rule, noting concerns over the scientific basis of certain provisions, work underway on an international standard, and the inability of the United States to put the necessary certification procedures in place by Jan. 1, 2001. Argentina is the most recent country to put in place new requirements for SWPM. Beginning in October, 2000, Argentina began requiring that all SWPM be free of bark, insects and signs of insect damage. An insect commonly known as the pine sawyer spreads the destructive pinewood nematode. China Nixes Nematodes China’s strict new requirements for packing material went into effect for all shipments leaving the United States on or after Jan. 1, 2000. Accordingly, U.S. exporters must certify that the packing material either contains no solid wood, contains no coniferous wood, or that the coniferous wood has been heat-treated to an internal temperature of 56 degrees Celsius (at the core) for 30 minutes or more. In addition, if it contains coniferous wood, USDA’s Animal and Plant Health Inspection Service (APHIS) must endorse that the coniferous wood in the packing material has been heat-treated. An insect commonly known as the pine sawyer the destructive pinewood nematode. What’s an exporter to do? For assistance, click on: www.aphis.usda.gov/oa/alb/alb.html
Towards an International Standard
Not surprisingly, given the proliferation of national standards, work is underway internationally under the U.N. Food and Agriculture Organization to develop an international standard. In June 2000, representatives from 12 countries and several private sector organizations met in Ottawa, Canada, to begin work on the new standard. While a significant amount of work remains to be done, a general framework has been developed. It is clear that all SWPM will require treatment in the future. What is not clear is what that treatment will be. An ad hoc committee is currently comparing various treatments in terms of effectiveness, health and environmental concerns. An international standard is still at least 18 months away.
Various Impacts on Various Players
What does all of this mean to you and me? Well, that depends on who you and me are. If we are one of the thousands of exporters that currently use wooden pallets and containers to move our products to market, it could mean that we use pallets and containers constructed of alternative materials (plywood, plastic or metal) in the future. At a minimum, we will probably have to pay more for our wooden pallets and containers. If we are one of the 3,000 or more wooden pallet and container manufacturers in the United States, it could affect our livelihood. It is quite possible, even likely, that a significant portion of manufacturers who produce hardwood pallets–which represent over 70 percent of total pallet production–will find it difficult to meet the new requirements. How much this will affect their overall business is unclear. It will depend on whether users are willing to purchase two different pallets, one for the domestic market and one for the export market. Some manufacturers (i.e., producers of softwood pallets) could actually see their business increase. In that almost 40 percent of all hardwood lumber is consumed by the pallet industry, there are also implications for hardwood lumber producers, as well as other sectors of the wood products industry. Loss of the pallet market for low-grade lumber could be devastating to the industry, and have a significant effect on the price for higher grade lumber and other hardwood products.
The author is the Trade Policy Coordinator for the FAS Forest and Fisheries Products Division. Tel.: (202) 720-6896; Fax: (202) 720-8461; E-mail: email@example.com